stumgev56
Standard Member
Adding a dashcam using hardwire kit, this can be a little unsuring to those without some auto electric knowledge, so if in doubt seek someone to do it for you.
The fuse box required is underneath the glove box, it is not covered so make sure there is no power switched on.
Fuse 15 is a 15 amp for power socket and your find it third row down on first row near back of glove box area.
The fuses are micro one so the piggy back is used with a 2 amp in the first socket and the 15 amp in second socket.
Feed the cable from centre of windscreen position and gently follow down and around pillar, do not use any force or tools into this area as there are airbags, your need to gently pull off the door rubber and use the channel to take wire down the door.
Side panel comes off with a movement using plastic car removing tools take it off and feed wire into the fuse box.
Connect to the grounding point near to fuse box and connect up to power to finish.
Place all rubber trim back as you found it.
The dash cam is now fitted and only comes on with power socket is working.
nextbase if set will run on for 5 mins from internal battery.
The fuse box required is underneath the glove box, it is not covered so make sure there is no power switched on.
Fuse 15 is a 15 amp for power socket and your find it third row down on first row near back of glove box area.
The fuses are micro one so the piggy back is used with a 2 amp in the first socket and the 15 amp in second socket.
Feed the cable from centre of windscreen position and gently follow down and around pillar, do not use any force or tools into this area as there are airbags, your need to gently pull off the door rubber and use the channel to take wire down the door.
Side panel comes off with a movement using plastic car removing tools take it off and feed wire into the fuse box.
Connect to the grounding point near to fuse box and connect up to power to finish.
Place all rubber trim back as you found it.
The dash cam is now fitted and only comes on with power socket is working.
nextbase if set will run on for 5 mins from internal battery.