Information & Inspiration For
MG Electric Vehicle Enthusiasts
MG Electric Vehicle Enthusiasts
-
-
Hello everyone, after three weeks and about 1100 km I can express an overall opinion on my MG ZS HYBRID + Luxury (top of the range model... -
Bruno reacted to diwat123's post in the thread My final post – a thank you and farewell to MG ZS Hybrid+ with
Like.
Thank you all for the kind words and support – it truly means a lot. We still don’t know exactly how things will look in terms of the... -
You find it strange that people who know nothing about this real problem shrug and say "what is he talking about ?" The video shows a...
-
I have only experienced 3000rpm when going at 90 km/h, then it settles down to about 2500 .This from my experience would be normal for a...
-
Bruno replied to the thread Overinflated Tyres.Dealers are not part of MG just franchises, they are independent, dealers should check the tyre pressures during the pre delivery inspection
-
Bruno replied to the thread Replacement Windscreen Availability.If its a stone chip can it not be repaired? if its cracked it would be illegal to drive?
-
I regularly travel on a road which has a fairly steep long hill, since I have had my MG ZS Hybrid the hill has had a 40 mph speed limit...
-
Word of caution most electronic tyre pressure gauges are not calibrated. I have 3 electric tyre pumps all with automatic cutoff when...
-
You normally have to drive the car a short distance.
-
Hi everyone, I have a question about tyre pressure. I took delivery of my new ZS Hybrid+ yesterday and noticed that the tyre pressure...
-
Bruno replied to the thread Overinflated Tyres.I have now driven the car after altering the tyre pressures, after a few minuets the reading in the car changed to the new settings, I...
-
-
A comment from me: I noticed after 5,000 km that the tire pressure of 3.2 bar with which the car was delivered is actually higher than...
-
Bruno replied to the thread Overinflated Tyres.I will reset the TPMS tomorrow, I will see what happens then.
-
Bruno replied to the thread Overinflated Tyres.I have just checked the tyre pressures with a Ryobi tyre inflator, it has a build in pressure gauge, it showed 41 psi, so I let air out...
-
-
Bruno replied to the thread Overinflated Tyres.I have just watched a video on youtube about the Ismart app, part of it you could see the tyre pressures, they were at 2.3 bar for 3 and...
-
-
Loading…
-
Loading…
-
Loading…
