I can slide the lower level setting up / down but when the car goes below 50% (car is currently at 47% with the lower level at 20%) it stops V2L functionality ignoring the lower limit. Once the car is back above 50% I will slide the lower level up to see if it actually does anything i.e. stops...
I think I have figured out the reason the car stops charging after a few seconds! To confirm:-
1. The car is in "Ready" to drive away mode
2. Car headlights are on (Dip mode if lights set to Auto), switch lights Off and the Day Running Lights remain ON.
3. With the discharge cable connected to...
Thanks for the info N2STY, I didn't have a 2k ohm resistor handy so I tried 4 x 470 ohm resistors in series (total 1880 ohms), it didn't work - same symptoms. For info there is nothing connected to CP not even a floating wire.
Aussi55, Here is the link to the cable I got from Ebay, it worked for...
Hi
Has anyone had problems with their V2L discharging switching off on a ZS EV 2022?
I have a type 2 plug with a 470 ohm resistor fitted between PE & PP, it was used to power individual items such as washing machine or tumble dryer (not at the same time!), the resistor still shows 470 ohms (I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.