Search results

Ridiculous situation at our local dealer. Wife took her car in last month for update, SE model on R16. Flashed it with the same firmware. Took it in again today after complaining and it having been rebooked, specifically specifying all the issues with LKA, headlamp dimming, android auto, no...

I mounted the screen on the phone shelf, wire thread through the cable tidy channel to the cigarette power socket beneath.

As I said earlier I added the wireless camera, look earlier in this thread I have photos of it behind the registration plate frame I also added. https://www.mgevs.com/threads/reverse-camera-se-lr.9579/post-193035

Do you mean motability?, my wifes is a motability and any permanent modifications would need to be discussed, thus we went the wireless route, the minor inconvenience of turning on the display she is fine with her. If it is motability, the other option before receipt is to cancel the order...

There are three options. 1. Buy a wireless reverse camera like we did and I would recommend fitting it to a registration plate holding frame as I installed, pictures earlier in this thread. Advantages are that it is very simple to fit, and the display can sit on the mobile phone 'shelf'...

If it is something you haven't done before (door panel removal) I have to say it is quite daunting the first time. I have changed speakers in our last three cars so used to it now, although from stock it is always difficult removing the panel the first time. Two things to note though...don't...

This thread can be closed now, grateful for an already quick PM with a referral link.

We are switching over to Octopus and would be grateful for a referral code. If some kind soul could please PM me with their code it would be doing us both a favour, thanks in advance.

We just got a granny cable and nowt else, bought a second hand Mennekes 'Mercedes' branded one off fleabay rather than opting for a dubious third party manufactured one on Amazon, then a masterplug branded charging case from Argos for £11.99 a whopping £1 cheaper than Screwfix and other places...

Glad I read this thread. Saved me a lot of head scratching. Oddly received our order today from Carmats.co.uk and the retainer clips on ours have been mounted on horizontally, so just had to unclip them and 90 degree rotate them.

Well certainly using a fast speed 3.1 Gen 2 cable has resolved connectivity issues for ourselves, now MG have to sort out the infotainment bugs.

Mini Blade fuses, micro are lower profile.

You can use a 2 blade fuse tap in the spare 3 blade socket to the right of the two that are already populated for switched live, as in the image earlier in the thread, as well as below 👇. That's what I used on my install the weekend for switched live.

Yes buddy, an excellent highly detailed guide for sure that gave me a good head start in installing the dashcam today. However it doesn't cover the removal of the rear view mirror housing so I came unstuck with the (relatively easy) removal of the right hand side of that, then...

How in the devils name did you manage to get the right panel of that mirror surround back in after removing it? No matter how hard I try to get it back in, once the plastic tabs lip underneath, the main metal prongs will not line up? Did you have to remove the left side to be able to put it...

@MrPeaski Handy solution, I would like to take you up on the kind offer, if you could inbox me the .STL files please.

Certainly from many comments USB 3.1 Gen 2 10GBps solve any issue if anyone is having problems. The cable we were using before was a braided 1.8m long USB-A to USB-C of an unknown speed/gen type. After using these new cables for a few days I will report back in this thread and hopefully like...

We have had connection issues between our two phones, both connect to android auto, sometimes after replugging them back in because they do not initially connect, or have a dropout...this is when I did my research further. The MG4 unfortunately has its shortcomings relating to android auto...

The average consumer, including myself could only dream of having a 3D printer that large, or print with that sort of quality, let alone fathom how many days it would take to print it, or the cost in reels of suitable thermoplastic, cheap PLA won't suffice. As in everything, copying someone...

Over the years that I have had film protectors and after use have found dust starts to accumulate around the edges, they then start to lift and peel. Also, touch screen use I find your finger tends to drag on the plastic. They may have improved since I stopped using them I don't know, but...