Search results

If fitting a Nextbase camera, the fuse in the piggyback unit is only a 2A, and comes supplied. 7A is a large current draw and I'd suspect too large for such skinny wires.... remember the Fuse is there to protect the wires/device and unless your device needs 7A to run, then using a lower ampage...

Except with the Nextbase hardwire kit where the fuse jumper has a right angle bend which sends it's cable out the side... and needs to 'miss' the larger blocked fuses at F4/5, F11/12, F15/16, F19/20, F29/30, F25, F26, F38 ,F39. Yes, still plenty of space, and F1 is the same fuse that Billy uses ;).

I fitted a Nextbase using their hardwire kit and found that F1 had the best clearance/cable routing... though NOT a permanent live...

May be worth giving the wheel a proper fit on to the hub... with a quoted PCD of 5x100mm for the 5 and 5x112mm for the ZS you are only talking 12mm (1.2cm) difference across the diameter (6mm on the radius) of the stud pattern - possibly easy to 'mis-see' when holding one wheel up in front of...