Search results

  1. rpannell

    Project OBD2 - Mobile App v1.2.1 and later

    On my Mk2 ZS EV, the daylight running light switch does not work unfortunately. Everything else works in the app OK. The other problem I have is that if I leave the dongle attached and linking to the app, when I lock the car, the alarm sounds.
  2. rpannell

    Project OBD2 - Mobile App v1.2.1 and later

    I'm hoping that part of my problem is due to the cell imbalance, which may be solved by the latest BMS. I will know in the next few weeks. As we both have similar problems with different BMS, it suggests that it's not a BMS problem but perhaps a faulty cell or two. At the current rate, in a...
  3. rpannell

    Project OBD2 - Mobile App v1.2.1 and later

    I'm is a similar boat to you. I'm on the original Jan 2020 BMS and have a cell imbalance of around 80mV. I was at 100% SOH until around 13,000 miles then it has dropped 2% (so now at 97.98%) over the next 2,000 miles. At this rate, I will be at the guaranteed 70% SOH around 45,000 miles. My...
  4. rpannell

    ECU Module version spreadsheet

    Yes, the fancy car graphics when selecting mode. The car has to be locked for AC charging. Delayed charging off a Granny is fine but I have not tried an Ohme or other timed charges. I will push for a BMS update during the 2nd year service in December. It will be interesting then to see if the...
  5. rpannell

    ECU Module version spreadsheet

    I have the lowest SOH so far, at 99.12%. It also has 64mV of battery imbalance and I don't appear to be able to get below this despite repeated rebalancing. However the range is good and I always measure between 40Kwh - 41Kwh when I recharge (range from 100% to 25% divided by the m/Kwh divided...
Back
Top Bottom