Search results

This all sounds a lot more complicated than phoning the AA and have them fix your puncture or tow you to a tyre centre.

I ask the Mg owners club this question I got the answer below. I am keen on heated mirror as I think they are a key safety feature. At some point I will dismantle the mirror to see is wiring is tied back. If necessary have the door card off to see what’s in there. I did this on a previous car...

That’s the one

The original one is steel, black coated. I used an old steel screw, the original washer and covered them both in grease before fitting. A dab of grease on the screw head afterwards. Job done.

The screws in the kit are fine except for one. The that fits inside the cup shape. It needs to be about 8 to 10 mm longer, try to re use the washer as a bigger one with snag on the edge of the cup shape and make it difficult to line up. I didn’t buy mine just used what I had in my tool box. I...

Hi smokie Please see my order below fro Ali Express. Hopefully this is what you need.

No original one are too short and won’t bite when you try to refit them with the extra thickness of the mud flap, you will need longer screws about 30 mm long

The front top is fixed to the bodywork and is a plastic bolt like the ones in the kit but the ones in the kit screw in whereas the one you are taking out simply push fits. I was able to reuse mine but not everyone will be that lucky. Over the last 50 years of driving i have amassed a massive...

No. Only need to unscrew lower screw, need to get under rear of car wheel not in the way. The upper screw is unscrewed using the angled key included in the pack, and you can turn it easily without removing the wheel To undo and replace

Bought mine from same supplier. I fitted myself, only removed and reused two fittings/screws for back set. The front ones both sides need a longer screw in the cup shaped insert as the original ones are way too short. Been fitted about 4 weeks now, very solid and don’t seem to need any more...