R
Featured content
0
Reaction score
16

Latest activity Postings Post Areas About

    • R
      Guesses: Should be no more than £300 fitted. Therefore probably £450?
    • R
      If it helps regarding the door opening sensors, the sensors will stop the door significantly before the imposing object. It is still...
    • R
      rkjm30 replied to the thread MG Cyberster GT - Alarm Issues.
      The dealership have been keen to help with the alarm activation issue. They tell me that they will “plug into” the car and should be...
    • R
      rkjm30 replied to the thread MG Cyberster GT - Alarm Issues.
      Which part do you turn off? I assume it is the interior monitor, is that correct?
    • R
      rkjm30 replied to the thread MG Cyberster GT - Alarm Issues.
      I had the alarm issue today. The car was parked about 60 miles from home in a car park at a marina. The alarm activated and self...
    • R
      rkjm30 replied to the thread Cyberster Dashcam Success.
      Thank you. That was great advice. Here are photos showing the first panel which must be removed.
      • IMG_1764.webp
      • IMG_1765.webp
    • R
      rkjm30 replied to the thread Cyberster Dashcam Success.
      Can anyone help with the removal of the drivers side knee panel? I see in the pictures how it should release, but I cannot seem to get...
    • R
      rkjm30 replied to the thread iSmart defaults to metric?.
      I have had 2 occasions where the car has switched from imperial to metric units without me selecting it. The first time I was...
    • R
      rkjm30 replied to the thread Delivery inspection?.
      A couple of things you might want to ask them to ensure they do: 1. Reset the service monitor, if it has taken a while for the car to...
    • R
      rkjm30 replied to the thread Home Assistant integration.
      I too had some difficulty getting the MG SAIC integration to work. I believe the key to it is the secondary users requirement. Under...
    • R
      rkjm30 replied to the thread Cyberster Software Versions.
      This is from Home Assistant using the MG SAIC integration (available in Home Assistant Community Store-HACS) and then selecting the...
    • R
      rkjm30 replied to the thread Cyberster Software Versions.
      I suggest that the dealership is asked to put the 12v battery on charge while performing the update. Note how low the battery is...
      • IMG_1739.webp
    • R
      rkjm30 replied to the thread GSM-Holder for Cyberster.
      If it helps, I bought the MGTitan one and it works very well. I have changed the magnetic attachment ring for an ESP halolock charging...
    • R
      rkjm30 replied to the thread 12V battery dead/won't open.
      I have just become aware of the issues of the drained 12v battery after a colleague showed me the Autocar article. I have just checked...
    • R
      rkjm30 replied to the thread Cyberster Software Versions.
      When I took the Cyberster GT with R28 software I believe it took more than 3 attempts using a laptop for the update to be accepted. I...
  • Loading…
  • Loading…
  • Loading…
Back
Top Bottom