Recent content by skyynet

  1. skyynet

    Cyberster Software Versions

    I don't have any speaker issues with R34. I saw reports of users without a working sub who wrote that this was due to an unfinished install, and was fixed with a restore to factory settings. Don't know if this is your problem. If so, any update might fix it.
  2. skyynet

    Cyberster Software Versions

    Everyone, dissatisfied with their sound should check, if the subwoofer actually works. There are reports of non-working subwoofers. This issue could be solved by resetting the car. I don't know, what resetting means and how it works. If there's no sound from the sub, I'd call my agent to fix it...
  3. skyynet

    Cyberster Software Versions

    In the German forum, someone got the R37 update at the service. Currently, no idea about what is improved.
  4. skyynet

    Switched +12V Supply for hardwiring a dashcam

    No, without permanent power. The thread starter asked "I need a switched 12V supply to ensure it only comes on when the car powers up, otherwise it'll drain the 12V battery while parked". For users with demand of permanent power, the shown solution, wiring to the fuse box would be better.
  5. skyynet

    Switched +12V Supply for hardwiring a dashcam

    Looks complicated. I just connect it to the interior lighting. I did it for my Blackvue and it works great and looks even better. See here (German only).
  6. skyynet

    Cyberster appears to be wired for a OEM dashcam

    I doubt, they really installed it anywhere. Also, 720p was mentioned, which is unusable for license plate recognition. I installed a 4K Blackvue dashcam with HDR into my Cyberster, which is powered from interior lighting. Fortunately, my dashcam is powered by 12V, but there's enough room for a...
  7. skyynet

    Interesting Article

    Owning a Renault Mégane Coupé Cabrio 3, I was looking for an electric follow-up convertible. First I was thrilled by the Polestar O2 which became the Polestar 6. When the price was announced around 200000 Euros, I was out. The Tesla Roadster 2 was the usual vaporware of Elon and also around...
  8. skyynet

    Updated MG iSmart iPhone app

    v3.1.3 doesn't change that. Usually, after 10 minutes, my car is quite warm (15-17 °C). Also, re-starting it works fine most of the time. The connection between app and car is just not very reliable.
  9. skyynet

    ABRP with ODB dongle on Cyberster

    Sounds reasonable. I subscribed for a year but also only use it while on longer trips. I'll terminate my subscription after the first year and will also only subscribe monthly, when I plan to go on a trip.
  10. skyynet

    ABRP with ODB dongle on Cyberster

    Correct, it's more or less a cosmetic issue to see the MG4 in ABRP instead of the Cyberster. The MG4 profile works. Since the consumption of electricity might be a bit different in both cars, the prediction might be a bit wrong. Since the SoC is considered on the road, this doesn't matter much...
  11. skyynet

    ABRP with ODB dongle on Cyberster

    Since ABRP v7 is out, I tried again to use the MG Cyberster preset with OBD2 connection. Unfortunately, this still doesn't work. Please upvote my bugreport, to get some attention to it. Currently, only 7 users voted for it, so there's not much attention for it.
  12. skyynet

    Updated MG iSmart iPhone app

    Maybe you should distinguish between the iOS and the Android app. I use the iOS v3.1.3, and it works fine with VPN. Well, as fine as the iSmart app works, which means not very. The response times are terrible and activating the heater especially now in Winter, is a gamble.
  13. skyynet

    Sound system underwhelming

    Someone from the German Cyberster forum had his car upgraded with a DSP amp. I compared it to my Cyberster and his sound was way better. Here's a German video of it.
  14. skyynet

    SAIC2MQTT Bridge - installation on NAS with Traccar feed

    I've setup the API access with a second account. My refresh values are: active: 30 afterShutdown: 120 inActive: 86400 inActiveGrac: 600 error: 30 charging: 0 I don't know, if these values are ideal but at least they work for me.
  15. skyynet

    SAIC2MQTT Bridge - installation on NAS with Traccar feed

    I really understand you. I'm a decent web programmer but don't know, how to compile Docker images on my own. Docker images are capsuled programs, which run on a server, computer or network attached storage (NAS) like my Synology. If you find something which sounds pretty cool, you still need to...
Back
Top Bottom