Search results

Hi I’ve upgraded my alloys twice First to a different style of 16” using the original tyres Second to 18” The preference is yours All you need to think about is the offset and wheel width The bigger the wheel the lower profile tyre you will need to keep the Speedo accurate My first upgrade...

Hi all I’ve just fitted some 18” Wolfrace Assassins to my pre facelift MG5 So here’s a few photos My old aftermarket alloys and tires are up for sale in the classifieds Thanks to Miles for the info when he added 18” alloys on his MG5/ MG ZS CHEERS 😃👍🏻👍🏻👍🏻

Cheers I did the mod more for the looks than function They just have some small led bulbs in and wired to the dip beam I went down the route of changing the headlight bulbs to night breakers when I got the car which seem a lot better than the oem ones But as I say more for looks I think it...

Hi I opted for the dipped beam 😃👍🏻👍🏻👍🏻

Hi I don’t think I’ll be putting speed holes in the car😂😂😂 Thanks Yeah I try to make my cars a little different but not too over the top I bought them from eBay...

Don’t know maybe a bit of both 😂😂😂😂

Hi all I’ve just added some splitters to front and rear bumpers just to make my 5 a little more unique 😃👍🏻👍🏻👍🏻

Hi Regarding the wheel studs just make sure they fit the wheel you are thinking of buying There are tapered and domed bolts As for the wheels themselves just be careful off the wheel width, diameter and offset I replaced my wheels with the ones pictured below I stayed with the 16” wheel...

Hi all Just a quick thing to note Ask or find out how high the jack goes as I have a standard scissor jack that doesn’t lift the mg5 high enough so I found out that the 5 ton Jack I had in the shed does the job REMEMBER THE MG5 HAS A FAIRLY HIGH GROUND CLEARANCE 😃👍🏻👍🏻👍🏻

Hi I think they were all discontinued If you are wanting alloys there are plenty of none oem ones around I have these on my car 😃👍🏻👍🏻👍🏻

Yes it’s an oem wheel I have aftermarket alloys on my car I sold 3 and kept 1 for a spare

Hi A full size spare wheel fits in the Mg5 LR with the boot floor in its highest position no problem 😃👍🏻👍🏻👍🏻

Hi Refitting the bumper is the complete reversal of removing it My father always said if I know how to use a spanner and a screwdriver anything is possible Nowadays it’s a lot easier to take photos of the removal process so you know how it goes back together Also you don’t end up with screw’s...

No I don’t have a static caravan 😂😂😂😂😂😂😂😂😂😂😂 Just looking back on what I’ve done I would say it would take about 4 to 5 hours for the full install that’s from taking the bumper off to wiring the lights up (and about £160 in costs with the lights, bulbs ,relay and wiring ) Maybe a little less...

Cheers 😃👍🏻👍🏻👍🏻

No lights Lights off Lights on 😃👍🏻👍🏻👍🏻

Hi all Today I decided to wire in the fog lights I fitted I finally made my mind up and bought some small side light bulbs and wired the lights up to the dip beam Photo below I will take some later tonight when it gets darker 😃👍🏻👍🏻👍🏻

I don’t remember the last time we had fog bad enough for fog lights I just think the car looks better with them Cheers 😃👍🏻👍🏻👍🏻

I just think the front bumper was crying out for them just to finish it off Cheers 😃👍🏻👍🏻👍🏻