charging cycle

A charge cycle is the process of charging a rechargeable battery and discharging it as required into a load. The term is typically used to specify a battery's expected life, as the number of charge cycles affects life more than the mere passage of time. Discharging the battery fully before recharging may be called "deep discharge"; partially discharging then recharging may be called "shallow discharge".
A "charge cycle" is not a unit of time; the length of time spent charging or discharging does not affect the number of charge cycles.
Each battery is affected differently by charge cycles.In general, number of cycles for a rechargeable battery (the cycle life) indicates how many times it can undergo the process of complete charging and discharging until failure or starting to lose capacity.Apple Inc. clarifies that a charge cycle means using all the battery's capacity, but not necessarily by discharging it from 100% to 0%: "You complete one charge cycle when you’ve used (discharged) an amount that equals 100% of your battery’s capacity — but not necessarily all from one charge. For instance, you might use 75% of your battery’s capacity one day, then recharge it fully overnight. If you use 25% the next day, you will have discharged a total of 100%, and the two days will add up to one charge cycle."

View More On Wikipedia.org
  1. A

    10-100% charging

    There is a thread in the MG4 section, which suggests that 10-100% charging is required every so often - apparently this is mentioned in the MG4 manual. I can't find anything in the MG5 manual that suggests that this is necessary - only charging to 100% and allowing equalisation to take place...
Back
Top Bottom