Content by Bharath2050 in February, 2026

Check in the forum software discussion thread. You will find the download link.

You mean VDS/SIPS programming features ? OR enabling the features for my VIN number ?

VDS3 software supports programming and routine check without using SIPS. Also it supports feature code enable/modification.

How to enable programming and routine menu in vds3 software?? In SIPS it's available but in VDS 3 it's not enabled.

Thanks a lot. It's a very useful information for me. I will follow this procedure for FDR. My worry is FVCM, its not visible the in list of ECU's in SIPS software.

Here is the Full Story : I’m from India. I own an MG ZS EV 2022 model. At that time, ADAS regulations were not applicable in India, so MG sold this car with the same hardware as other markets (UK/AUS/EU) but with ADAS disabled in software. In 2023, MG launched the ADAS variant in India using...

Its not not showing in the SIPS.

Facing the following issues. Not able to enable ADAS functionality in my CAR. eTBO X 1 B1533 13 Microphone Input Open Confir med 2 B1535 13 Speaker Open Confir med FDR Images attached Anyone familiar with these issues? Please let me know how to fix it...

Thanks. I restarted it. Hoping to finish it soon. :)

can you explain this step by step please.

Okay. Where can I find it ? Also IPK repgramming stopped and now the IPK is not turning on. What should I do... Its blank. Do I need to do reprogramme again or replacement ?

One last thing, FICM requires USB update. Please let me know the process.

Hi, It's working now. The problem was with vnci vdi3 tool. It's firmware issue. Now working fine. I connected a 12V charger and started updating. Already updated few modules. Rest will finish by tonight I guess. The only problem is IPK reprogramming taking very long time. Thank you so much for...

@DonBattino452 The software Ver. 2.0 and the firmware is 1.0.9 I guess

I'm facing the same issue. Also I use VNCI VDI3 tool. What is the fix ?

Thanks. I will check. Also someone posted the same issue before. I'm just checking that. I'm using VNCI VDI3 tool. I think its creating the problem.

Hi, Yes! Its a MG ZS EV. I didn't find any post in ZS EV section discussing VNCI, VDI, firmware flash, upgrade etc.. So I posted here. Please consider this as general software related talk. I think SIPS and VDS is same for all MG Cars. :)

I bought a used one. Its a 2022 model with 88% SOH and 140k kms on meter. It had few minor accident history so may be some parts replacement is done by the previous only. I'm not sure about that. That error is becuase of the parts replacement or something ?

Its 13.6V and it went down to 12-11.5V so I connected a 13.6V 20A Charger. Now the voltage is stable. Also the overall battery pack voltage is 400V and its 98% charged.

So you mean to say " Turn on the Vehicle, keep the door open ". I will try this. Also I keep getting HV Battery shut off notification whenever I try to turn on the car without pressing the brake pedal.

What actually failed (from your log) Your sequence is: ✅ Downloading Function File – Succeeded ✅ Reprogramming Download Process File – Succeeded ❌ PPF File Run Failed ❌ Reprogramming Flow Failed ❌ BCM/Reprogramming Function Failed 👉 This means: The issue is vehicle state / conditions...

Okay. I will try this. It failed in almost all module programing. Only few got updated.

Yes.. I did that. I connected a 12V charger to keep the power supply stable.

Hello everyone, I have an mg zs ev 2022 model, I tried to update softwares and things. I'm getting the following error while reprogramming the BCM. Can anyone help me how to resolve this issue.