Recent content by RayPalmer

Calvin70, Please let me know how it goes.

I have had mine fixed under warranty, so cost me nothing.

Just to let you know FreeCAD is free and can be downloaded and installed without ANY restrictions, from which anyone can produce the STEP files. Just search for it and follow the FreeCAD.org link.

I have not tried, but I think it can. Just checked and yes you can. If any one does make their own version, please share pictures of your efforts.

Attached here is the FreeCAD model from which anyone can create the STL files or modify to suit Also attached are the STL files. I changed the logo a bit to avoid any legal issues. You will need some M3 screws to screw it all together most are M3 x 8 mm and a few are M3 x 12 (for the hinge mount...

the next iteration now has a MG logo.

My Kobra 3 MAX is a 450 x 450 x 450, so yours would be unable to print it. It might be doable on a 350 x 350 x 350 printer as the diagonal maybe enough.

There is a type 2 (AKA Level 2) cable to charge at public chargers where you supply the cable to connect. This cable has the same plug on either end (as mystreet has shown) and is about 2m in length and is quite thick. Here is version 2 which can store both the trickle charger and a Type 2...

Yes, I do have the Type 2 cable and agree its a lot thicker and thus makes it difficult to store for what I have designed, but I am looking to see if both halves can be modified to allow for the cable to sit atop.

I have created a functional 3D printed Front Trunk. This is the very first version and still has a lot of refinement to do to get it to something approaching acceptable. Hope people find this interesting. It cannot store a Type 2 Cable as the thickness of it cannot bend to fit the space...

Has anyone in the UK or Australia been involved in an accident and found that their airbags failed to deploy in their MG4. Yesterday my Orange MG4 Long Range 77kWh car was t-boned just before exiting a round about and noticed that none of the air bags were deployed. My accident to my car was a...

It is sort funny that we now rely on Apps to navigate when a little planning can often be the only thing to think about before you start a journey. Like finding out where the chargers are along your intended route. People need to be a little more aware of how far your EV can go on a full charge...

I have made my own inserts to replace the OEM covers, thus spare the covers from being damaged. Also I can design my own covers to suit what I like. These are printed in ABS (do no use PLA or PETG) as anything other than High temp materials is likely to warp on hot days and fall off.

Well you can get a stick-on temp gauge and use that. They are cheap to get.

I have created a set of Registration plate covers for my WA (AUS) plates and think they look nicer than the standard covers supplied by the dealer. They have been designed with just the standard WA rego plates 372 mm x 132 mm. They have been printed in ABS for the what you see is green and the...