Current trip m/kWh retained after switching off.

[Kithmo]

Anyone noticed the current trip screen info is retained after switching off, unlike the ZS.
Often in the ZS I forget to check the journey's m/kWh before switching off and switching it back on resets it to ----
In the MG5 it retains it and I can check it by switching the car back on if I forgot.
Or am I missing some setting on the ZS that retains it ?

 

[AbuG]

My ZS retains it... For at least an hour

 

[AdamMGEV]

I'm sure on mine I have a page where it shows me current trip which always resets and a page for average trips overall which you can reset. You're not looking at the average are you? I'll have to check later when I drive.

 

[Kithmo]

I'm sure on mine I have a page where it shows me current trip which always resets and a page for average trips overall which you can reset. You're not looking at the average are you? I'll have to check later when I drive.

No, both the average and the current are still there on the 5

My ZS retains it... For at least an hour

My ZS definitely doesn't retain it, I've switched it straight back on after switching off and it's reset back to --.--

 

[Cocijo]

That’s another interesting variation. My ZS holds the short term trip for about an hour or so. If I switch off and lock the car and say shop for 45mins when I return and drive off it still has the short term trip details retained. The longer term trip needs resetting to remove the figures.

 

[GordieG]

My ZS retains it... For at least an hour

Mine too. If you have a pit stop, you‘re still on the same journey! Current trip info is there until the journey finishes.

 

[Kithmo]

Proved myself wrong today chaps, turned ZS back on after SWMBO came back from shopping and lo and behold the current trip data is still there, I must have not switched it back on straight away as I said before, it must have been some time later or I may have switched it off and on a couple of times. DOH !