Cyberster doors not opening on a slight slope

[CyberNewbie]

Interesting scenario yesterday evening. We took the Cyberster to our allotment where the car park is on a slight hill, and we could not open the doors, they both opened a few millimetres and could not be opened or shut further. I carefully drove (with the doors slightly open) to a flatter area and the doors opened OK. It does not take much of a hill to stop the doors working. I did not try at the time, but would I have been able to open the doors if I switched to manual mode (has anyone tried this)?

 

[Chongma]

The doors can be pushed open further, just need to go to the gym more! I've found that the issue is with a gradient going across the car so passenger / driver side is higher than the other (roll axis?). If the car is straight on an incline, (car front higher/lower than the back, pitch axis?) then the doors will still open.

 

[CyberNewbie]

I did not want to force the mechanism so did not try, and we were parked with passenger door higher than the driver door. If I do get stuck again will try manual mode and brute force