Mats for 2026 models ?

[Jaujan]

Hello,
Have any of you found floor and trunk mats suitable for the 2026 model? Are the dimensions of the mats the same between the 2022-2024 and 2026 models?

 

[MG Clive]

I've transferred the floor mats and boot liner into my 2026, and they are exactly the same for both models

 

[Jaujan]

Thanks, I'll start looking then ;-)
(I'm also going to check my profile to find out how to add a relevant signature )

 

[MG Clive]

(I'm also going to check my profile to find out how to add a relevant signature )

Click on your Username at the top of the screen, then select 'Signature', and welcome to MGEVs.

 

[boyfrom64]

We brought mats for our car off Amazon:

Prestige Mats

You can buy them with coloured edging but we went for the plain one.

Edit moderator: URL deborked; spelling of "mats"

 

[siteguru]

You need to fix your link.

A search for Prestige Mats (rather than Msts ) yields 2 or 3 different options.

 

[boyfrom64]

You need to fix your link.

A search for Prestige Mats (rather than Msts ) yields 2 or 3 different options.

Maybe a glass too many of Red Wine and using a phone not a laptop.

 

[siteguru]

The link is still b0rked.

Edit moderator: Now fixed.

 

[Alice Cooper]

We brought mats for our car off Amazon:

Prestige Mats

You can buy them with coloured edging but we went for the plain one.

Edit moderator: URL deborked; spelling of "mats"

I bought some off Amazon for my 2026 MG4 and the drivers side fastener opening are horizontal not vertical

 

[MG Clive]

I bought some off Amazon for my 2026 MG4 and the drivers side fastener opening are horizontal not vertical

The clips in the mats should just rotate 90 degrees quite easily.

 

[Alice Cooper]

The clips in the mats should just rotate 90 degrees quite easily.

Sorry, I meant the clips built into the floor are vertical including the mount so the mat having a horizontal opening doesn't fit over it

 

[MG Clive]

Sorry, I meant the clips built into the floor are vertical including the mount so the mat having a horizontal opening doesn't fit over it

Same reply applies, the clips in the mat just need rotating 90 degrees.

 

[Jaujan]

I bought some off Amazon for my 2026 MG4 and the drivers side fastener opening are horizontal not vertical

Do you have the link to the product on Amazon?

 

[boyfrom64]

Do you have the link to the product on Amazon?

Here is the link:

Prestige Mats, Fully Tailored Car Floor Mat Fits MG MOTORS UK MG4 EV 2022 ON, CARPET, Non-Slip, Edged with Black Binding : Amazon.co.uk: Automotive

Buy Prestige Mats, Fully Tailored Car Floor Mat Fits MG MOTORS UK MG4 EV 2022 ON, CARPET, Non-Slip, Edged with Black Binding at Amazon UK. Free delivery on eligible orders.

amzn.eu

The clips in the floor twist.

 

[Jaujan]

Well, they're not available here in France, but it gives me a good idea of what's possible to obtain.

 

[Alice Cooper]

Same reply applies, the clips in the mat just need rotating 90 degrees.

In the driver's footwell are two circular bits of plastic with an oval mount which sits on top. Part of which can be swivelled to secure the mat. The fixed oval mount is vertical but the holes in the mat were horizontal therefore would not fit over the fixed part of the mount

 

[siteguru]

In the driver's footwell are two circular bits of plastic with an oval mount which sits on top. Part of which can be swivelled to secure the mat. The fixed oval mount is vertical but the holes in the mat were horizontal therefore would not fit over the fixed part of the mount

But the bit (on the car floor) that swivels is the bit that goes through the mat, is it not? So simply swivel them to be "horizontal", push the mat over the mounts, then swivel them to be "vertical" to secure the mat in place.

(I assume by "horizontal" and "vertical" you mean parallel and perpendicular to the car seat front edge).

 

[abez]

But the bit (on the car floor) that swivels is the bit that goes through the mat, is it not? So simply swivel them to be "horizontal", push the mat over the mounts, then swivel them to be "vertical" to secure the mat in place.

(I assume by "horizontal" and "vertical" you mean parallel and perpendicular to the car seat front edge).

Hi Everyone
I've recently taken delivery of my new 2026 MG HS PHEV and must say im very imressed with it. I ordered new mats with it but the dealership had run out but posted them to me and i received them a few days ago. Ive Just fitted them but found the oval fixing hole in the mat was perpenducular to the oval mount in the floor. The oval part in the mats needs to be rotated 90 degrees to enable it to fit . These are tricky to rotate by hand. I used the handle of a butter knife to rotate mine. Then I placed on the floor over the fixings and rotated the buckles which I found difficult to do by hand so used a pair of pliers. rotated the fixings

 

[Alice Cooper]

But the bit (on the car floor) that swivels is the bit that goes through the mat, is it not? So simply swivel them to be "horizontal", push the mat over the mounts, then swivel them to be "vertical" to secure the mat in place.

(I assume by "horizontal" and "vertical" you mean parallel and perpendicular to the car seat front edge).

Part of the bit on the floor doesn't swivel so remains perpendicular which doesn't match with the parallel holes in the mat

 

[siteguru]

Part of the bit on the floor doesn't swivel so remains perpendicular which doesn't match with the parallel holes in the mat

Ah. In which case use a tool (large flat blade screwdriver?) to rotate the fixings in the mat .. they do turn, it's just not easy to do. (Same applies for the floor fixings).