Mg5 black diamond cut wheels

[Ranger]

If you have the black wheels with your old silver centers, the number for the shiny black and silver center cover is 10391107.
I can't wait to get these babies on.

 

[Jonnobris]

I wanted these wheels for mine but MG have stopped selling them

 

[Ranger]

There are lots like them and it mean you could get a different size wheel. I only got these for the ease of swapping 1 to 1.

 

[Ian MG5]

I wanted these wheels for mine but MG have stopped selling them

Hi
As Ranger has said there are plenty of aftermarket wheels out there for the Mg5 it just depends wether you want to go bigger or stay the same size
I picked my aftermarket wheels up for £420
They are 1/2” wider and stick out a little more than the original wheels and 16” in diameter so i could use the original tyres but that’s what I wanted
If you are looking for a straight swap this is what you need to look for as this is the mg statistics on the mg5 wheels

PCD 5x112
this is how many studs there are and what the circumference of the circle they make

Rim width & diameter 6 1/2” x 16”
Mine are 7” wide

Offset 41mm
offset is the distance in millimetres from the centre line of width of the wheel to the edge of the wheel
Mine are 38mm

Centre bore 57.1mm
This is the size of the hole in the middle of the wheel
If the centre bore is bigger than 57.1mm spigot rings can be bought to make to the right diameter but if the centre bore is smaller than 57.1mm the wheels will not fit

Hope this helps
A few photos of mine below

 

[weedavemac]

Thanks for all that info.

Would the pressure sensors transfer across to replacement wheels easily?

 

[Ian MG5]

Thanks for all that info.

Would the pressure sensors transfer across to replacement wheels easily?

Hi
Yes the guy who I use said that the only thing he has to do is take one wheel at a time off
That’s all he did
I had them changed in January and all is good with the sensors tyres are keeping pressure

 

[BarryH]

A couple of useful Wheel and Tyre comparison tools are these but remember changing the overall tyre rolling diameter will also subtlety alter the steering geometry as will rim width and offset.

215/50 R17 vs 215/55 R17 Tire Size Comparison Table with Graphic Visualization

The difference in sizes and parameters between the 215/50 R17 tire and 215/55 R17 tire. Detailed calculations and graphics.

tire-calc.com

Rim & Tire Size Calculator. Custom Offsets

Tire Tech Information - The Wheel Fitment, Tyre Stretch, Rolling Radius and Speedometer Error Calculator. Play with specs, try different settings, compare results

www.wheel-size.com

 

[Jomarkh]

If you have the black wheels with your old silver centers, the number for the shiny black and silver center cover is 10391107.
I can't wait to get these babies on.

Do you know what size the black and silver MG inserts are so I can track them down. Thank you

 

[Ranger]

Use the part number I gave, the 2 sets I bought off eBay were the wrong size. Sorry I can't be more help.