Search results

Page 4 of this thread, post #62 & #64.

ZS roof rails are rated for 75kg.

Let us know what you actually achieve in a few days/weeks time.

There are quite a few listed here: Thread: Acronyms are confusing

Probably on paper, in reality I think it will be a negligible difference.

11mV, looks like a very short balance or not at all, but in the past I've had a ~5hour balance(expected as BMS software 0603610R28) Previous long balance:

Resetting the accumulated total has zero effect on the actual range achieved, it is all down to how you drive and the conditions. Easy ways to achieve a better range: Drive with a lighter right foot Avoid motorways/high speeds Less achievable options: Only drive with a tail wind Avoid wet...

As a guess it will be using a default value to calculate the GOM figure rather than your recent 3.4KWh driving style.

Have a read of this thread: https://www.mgevs.com/threads/zappi-timed-charge-help-needed.1300/ * Hopefully your car has the software updates to allow for delayed charging. If following the above thread and it doesn't charge, looks like it's back to the dealership.

Yes, there is only a short window to remove the charge cable before the lock actuates closed.

What smart charger do you have? Ask your dealer to ensure that they have updated the EVCC module to allow for 10 hour delay to charge starting. The software in my EVCC that allows this is software code 1770124111.

I have a 454v photo if no one has a 455v photo.

Can Miles elaborate on previous 'BMS' updates that have included updating the EVCC - Electric Vehicle Charge Controller (delayed charging) & OBC - On Board Charger (unlocked charging). Also what does IPK stand for, this module was updated as part of a BMS/HV Battery update.

On your MG5 yes, this thread is about graphics on the ZS.

Roof rails fiasco springs to mind...

Only they can answer that for definite, but from mine and others experience of the service from Chorley Group MG, it will.

Here is my Zappi 2 charging whilst unlocked, make sure the Zappi is set to FAST mode, after inserting the charging lead you should hear the charging lead lock actuate and charge begin. Unlocked AC charging: If it doesn't it looks like your On Board Charger (OBC) wasn't properly updated...

42psi? The manual states 33psi when cold:

Sorry I can't help with this charger. I have a Zappi 2 and can delay charge fine. My BMS is was updated on 20th October, just before the range reduction release.