3D Printed Front Trunk

[RayPalmer]

I have created a functional 3D printed Front Trunk. This is the very first version and still has a lot of refinement to do to get it to something approaching acceptable.
Hope people find this interesting.
It cannot store a Type 2 Cable as the thickness of it cannot bend to fit the space available.
It does fit the normal home charger cable.
It was printed in PETG and took me about 1 week all up. While PETG has some temperature resistance above that of PLA, I will look to ABS/ASA for better temperature handling as ABS/ASA can go a high as 100 Deg C before deforming.
I have uploaded a video talking about it on youtube, but forgot to get the URL link just search for MG4 or Frunk.

 

[MG Clive]

Excellent work @RayPalmer

Here's the YouTube video.

 

[slmorgan42]

I have created a functional 3D printed Front Trunk. This is the very first version and still has a lot of refinement to do to get it to something approaching acceptable.
Hope people find this interesting.
It cannot store a Type 2 Cable as the thickness of it cannot bend to fit the space available.
It does fit the normal home charger cable.
It was printed in PETG and took me about 1 week all up. While PETG has some temperature resistance above that of PLA, I will look to ABS/ASA for better temperature handling as ABS/ASA can go a high as 100 Deg C before deforming.
I have uploaded a video talking about it on youtube, but forgot to get the URL link just search for MG4 or Frunk.View attachment 43538View attachment 43539View attachment 43540View attachment 43541

Looks amazing.

Curious do you have a 1 Phase type 2?
I have both a 1 and 3 phase cables and the 1 phase is much more flexible than the 3.

 

[RayPalmer]

Looks amazing.

Curious do you have a 1 Phase type 2?
I have both a 1 and 3 phase cables and the 1 phase is much more flexible than the 3.

Yes, I do have the Type 2 cable and agree its a lot thicker and thus makes it difficult to store for what I have designed, but I am looking to see if both halves can be modified to allow for the cable to sit atop.

 

[siteguru]

You've misunderstood ... all AC cables that plug into the car are Type 2, as that is the standard for the connection (plug and socket). The question was whether you have a 1- or 3-phase cable ... 1-phase cables are usually a lot thinner than 3-phase ones, and thus are more flexible.

Whether yours is 1- or 3-phase will be printed on the cable itself.

 

[mystreet]

If you cannot sed any text on the cable, an easy way into look at the end and if L2 and L3 have metal in them it is more that likely a 1 phase cable. L1 will have something in it.