What size and thread for lockable HS wheel nuts, and where from, Amazon or Ebay ?

[ajw1100]

Title sort of says it all, but rather not use ebay......

 

[sky0000547]

Brown and Gammons

 

[Mike SOS]

What is the correct wheel nut size for a 2025 HS Plug in car?

 

[MG Clive]

What is the correct wheel nut size for a 2025 HS Plug in car?

14x1.5 according to this, which is the same as most other MGs.

 

[Mike SOS]

14 x 1.5 may be the thread size. It is the cross the flats of the wheel nut I am asking for. As I see there is no wheel tool to remove the nuts in removing the wheel and tyre.

 

[MG Clive]

14 x 1.5 may be the thread size. It is the cross the flats of the wheel nut I am asking for. As I see there is no wheel tool to remove the nuts in removing the wheel and tyre.

It'll probably be 17mm, but if you're after a wheel wrench, one like this will cover all wheel nut sizes.

.

 

[shadowman]

Locking wheel nut (set of 4) MG GS ZS ZS EV HS AND MG5 - Brown and Gammons

Locking wheel nut (set of 4) MG GS ZS ZS EV HS AND MG5 RRB000080E0 in MG6 Accessories

www.ukmgparts.com

wrench size 17mm

 

[shadowman]

https://www.ebay.co.uk/itm/19728992...njU2vaXuLBmyD5gVOeGM6zK1U=|tkp:Bk9SR5iItouDZg

seller offered me these for £36 genuine MG again.

 

[MG Clive]

https://www.ebay.co.uk/itm/197289920741?_skw=RRB000080E0&itmmeta=01K0CBDGFYF2NHS7FTP8C7GPEP&hash=item2def6548e5:g:0oIAAOSwQ3hoGdui&itmprp=enc:AQAKAAAA0FkggFvd1GGDu0w3yXCmi1dB4pv9sRLG8z1+B2G2IvOsO+R+rbpY+Me5eCr7YBPTO8aPaYO6QxF3gXAbChBZKADQFrw0h3zkU3P39YijdKiSkFZwQIn0a3MsC3y11wCi5X3ji0FYTmNWobq1UTrYSDTitpeCMg9OIn69i17pQgTKOrXkJTM9QzZkX1RUy+wA5lFM4gqHIzbhpRtLrIJCpL1+b5VouTjtL2BEb1LpVH+WYRe87IBAV0QQaZq2jDnjU2vaXuLBmyD5gVOeGM6zK1U=|tkp:Bk9SR5iItouDZg

seller offered me these for £36 genuine MG again.

I'd be a little wary of that, the ad says "Fits all MGs from 2017" but gives the size as 12 x 1.75.
I've had 2 MGs and they were both M14x1.5

 

[salty]

 

[shadowman]

I'd be a little wary of that, the ad says "Fits all MGs from 2017" but gives the size as 12 x 1.75.
I've had 2 MGs and they were both M14x1.5

if the part number quoted is correct then they fit my ZSEV and my S5 EV so should be fine for MG4 as Brown and Gammons lists that part number as MG4 compatible. I suspect they ve misquoted the thread size

 

[Mike SOS]

Hi I have sorted it out.
First you have to remove the plastic nut cover. The plastic finger tool is in the boot. Nut size is a 17mm socket.

 

[MG Clive]

if the part number quoted is correct then they fit my ZSEV and my S5 EV so should be fine for MG4 as Brown and Gammons lists that part number as MG4 compatible. I suspect they ve misquoted the thread size

Yes you're probably right there

 

[MG Clive]

Hi I have sorted it out.
First you have to remove the plastic nut cover. The plastic finger tool is in the boot. Nut size is a 17mm socket.

Ahh, it all makes sense now.