Put Parking Brake in service mode

[runar]

Hi

Do you know how I put Parking Brake in service mode on MG ZS EV 2020 or is it not possible?

Regards
Runar

 

[Alb]

I don't think that there's an owner accessible way of doing this but I'd hazard a guess that it would be possible to disconnect and apply a voltage to the parking motor directly. What I don't know is whether any logic relating to brake limits is contained in the brake assembly or external control unit.

 

[Roldorf]

Put the car into Neutral N. You will need to put something on the drivers seat to switch on the seat sensor and exit through the passenger door.

 

[LaS]

I think this is the way:
1 keep drivers door an bonnet open
2 press start 2 times without pressing the brake pedal, this activates the hv battery fail message
3 turn off the hand brake
4 disconnect the 12v battery minus cable (this prevents the brakes from moving when working)
5 use a 9v batttery for rewinding the caliper engine (no need for 12v, 9v is ok)
6 Press in the caliper
7 do your brake repair stuff..

After:
Reconnect everything, brakes, battery, cabels and turn on the hand brake.