Radio module replacement

[marekraska]

_202112_SC26+DAB+updating+software.rar - AnonFiles

anonfiles.com

Hi
Yor archive contain one file "DAB304_app.bin" or more?

 

[marekraska]

M

Post in thread 'Radio upgrade !!!!!'

Jul 11, 2025

MG has launched yet another incomprehensible repair campaign to replace a DAB set using an antenna stuck to the glass with a module using an internal antenna. Both modules have similar functionality: no RDS and no saving of favourite stations, and use the right-hand USB port.

I installed the original radio module in a dedicated location.

There is DAB and RDS.

I attach a document from MG RMI describing the procedure for installing the module without RDS.

Just use the RBRM module 10979150 and plug in the FM and USB connectors in addition.

Then swap the antenna connectors located under...

• marekraska

 

[Bru01]

Have sent you a DM

Hi there, I have an MG ZS and have had the same issue where by the radio FM, AM or DAB it always displays the Radio Initializing. I have spent many weeks and hours scrolling around the internet until I came across this thread. If you are still active would it be possible I you could send me the DAB files please so I could update my DAB file. Ive read on the internet about disconnecting the battery, forcing a hard reset also doing a factory reset and none of that worked. My next option was to book in at the dealer but if im honest im a bit reluctant to. I to tried to update the DAB through the engineering screen thinking that would update the DAB station list but as soon as that fail and i went back to the normal operating screen I saw that all radio stations were lost. If you could send me those files I would be so grateful!

 

[Gomev]

Can I kindly ask you if you could send me this file too, as I have the same problem. Thank you

See post #143 or #148.
The files have been posted many times in this thread

 

[Bru01]

Apologies, I have successfully download the files. I was unaware the the files were available to be downloaded.

 

[marekraska]

If the update does not help, disable DAB/RDS in the engineering settings - page 3.

FM/AM radio without RDS should start up.

This was the case in my MG EHS before the RBRM module was fitted.

 

[Bru01]

Thank you! I will give that a try when I get home. Appreciate the advice, if it works or doesn't work I will let know.

 

[Bru01]

Thank you Gomev and marekraska I went home last night and through the engineering screen managed to get the radio to work!​

 

[marekraska]

Bru01...
What you done?

 

[Bru01]

Bru01...
What you done?

I did as you suggested, I disabled the DAB/RDS in the engineering setting before I updated the radio using the .bin file and it updated successfully.