Aftermarket Wheels

[Blur]

Has anyone determined the offset range for 17-inch rims? Is it from 40 to 60? Has anyone installed ET36?

I am using 16" Audi wheels for winter, 7.5" wide with ET37. Works great

Today I was able to program NFC TPMS sensors with 11082920 oe number. Shall see tomorrow of it worked.

Doesn't work. Lets see if MG service does some magic as the sensors should be identical to OEM.

 

[CGYorks]

I am looking for aftermarket wheels for XPower but getting ET 51 may be challenge as websites do not seem to offer/specify this…

I can find 18” and 5x112…

 

[salty]

I am looking for aftermarket wheels for XPower but getting ET 51 may be challenge as websites do not seem to offer/specify this…

I can find 18” and 5x112…

ET 45 or Even ET 40 would be ok. And would look great. What about 20s.
???

 

[salty]

You almost certainly won't get ET 51
But as I've said a lower ET will be perfectly fine. ET 45 are plentiful and would look Awesome. They would only stick out 6mm each side, so no problems.
Would give you a 12mm wider track. ??

 

[Bricktop X PWR]

ET 45 or Even ET 40 would be ok. And would look great. What about 20s.
???

View attachment 27168
View attachment 27169

Looks the absolute dogs m8

I never did hear back from that suspension place.

 

[IF27]

Posted in a previous thread, demo model in a Dublin dealer, with re-sprayed trims too

Can anyone tell me what type these wheels are? Description please ??

 

[MarkGSmith1982]

VW golf and Skoda Octavias run a very similar ofset and same PCD..so look for maybe even OEM VAG wheels. (Just not the later Audi stuff as the centre bore is 66.5mm rather than 57.1mm)

 

[WigglePig]

I think a set of Mk1 Fiesta XR2 “pepper pot” alloy would look just the jobbie.

 

[MarkGSmith1982]

I think a set of Mk1 Fiesta XR2 “pepper pot” alloy would look just the jobbie.

Wrong pcd..

 

[MG Clive]

Wrong pcd..

And way too small.

 

[salty]

And way too small.

Absolutely!

 

[WigglePig]

Easily fixed with a bit of filing…

But that aside I said I thought they would look good, not that they would fit…

 

[Kithmo]

But that aside I said I thought they would look good, not that they would fit…

Beauty is in the eye of the beholder.

Opening hours​

Mon-Fri 9:00-17:30
Sun 10:00-16:00

 

[Billymanta]

I've taken the trims off and bought some centre caps for £12 on eBay - great look

 

[MG Clive]

I've taken the trims off and bought some centre caps for £12 on eBay - great look

Yes that looks great Billy

 

[Wizard of Oz]

Can anyone tell me what type this wheels are? Description please ??

If they're not these rims, then they are very similar.

18" Dotz Fuji Black Polished Alloy Wheels

 

[MrPeaski]

I've been a little busy with my '4' today.
I've been running without the aero covers for a couple of months to see what difference it makes to range and I'd say negligible so.....
After giving it a quick wash I set about painting the brake calipers and painting the stock wheels.

The bolt covers and centre caps I designed and printed myself in TPU. The carbon look is achieved with a carbon effects build plate so any filament picks up the pattern on the first layer.

The paint is E-Tech from Amazon, Sky blue brush on for the calipers and PRO Bavarian Dark Anthracite spray for the wheels.

 

[salty]

Very Impressive! Like that a lot!

 

[dsimpkins]

The carbon look is achieved with a carbon effects build plate so any filament picks up the pattern on the first layer.

Not heard of this before, what printer are you using, and where did you get the build plate?

 

[MG Clive]

Nice work @MrPeaski, I like it.