Windscreen cleaner spray nozzle issues/replacement

[DonBattino452]

Mine were between / \ and - - . Maybe I have to adjust them.

 

[gdog]

what do you guys mean by between / \ and - - etc is there some setting of an adjustment to nozzel

 

[Brookie71]

The car is excellent in all areas apart from the washers . I fitted new two jet washer jets.I fabricated two brackets to fit over the existing jets . Cost about £5 . I agree the airflow above and below the bonnet has quite an effect between A roads and Motorways .The new jets are much easier to adjust now . Trying to adjust the original jets was frustrating to say the least!

 

[DonBattino452]

@gdog I mean the positions of the nozzles. Mine were - - at first, then | | and I think / \ is the best way for my use case.

 

[Kithmo]

@gdog I mean the positions of the nozzles. Mine were - - at first, then | | and I think / \ is the best way for my use case.

I didn't know you could rotate them, I have only been adjusting them up, down or side to side with a pin. I might try that before I try replacing the nozzles. Does it make a big difference ?

 

[DonBattino452]

I didn’t come up with the idea of adjusting the position of the windshield washer nozzles myself. I actually stumbled across this topic by chance in the German MG4 community, where people shared tips on what can be done. It’s still not perfect, but definitely better than the factory setup. The best results seem to come from replacing the washer nozzles with aftermarket ones. However, you have to be careful, as MG uses a specific mounting design.