BillyWhizz
Established Member
Finally got around to fitting my new charger port housing removed all the bumper fittings as described in the video posted by Ian at this point I noticed I wouldn’t have to remove the full bumper just loosen at the wings and around the lights then pull forward this gives enough space to get to the back of the housing and with a stubby screwdriver you can remove the four screws and unclip the power cable for the door lock and it’s out the reverse to install
Attachments
-
D05C0619-4E67-4A53-AA48-E06A829D919C.jpeg1.1 MB · Views: 123
-
C869C651-3028-4348-8140-B0A62B1D3DF6.jpeg720.7 KB · Views: 115
-
2392CB45-12E4-48CE-99F5-F18165411B41.jpeg518.9 KB · Views: 115
-
FBDACCAF-27F6-47B3-B20B-D672E8B6E946.jpeg515.1 KB · Views: 114
-
90A97D71-BD9B-4C6C-BBBF-4C5589E7135C.jpeg547.5 KB · Views: 122