Radio module replacement

[andykuu]

Hey!
I would love if anyone could send me the file also. =)
@trinenmark
@Joioannou
@espadoni
@LambertS
@Garfanki
@Bob Russ
@ASRtichy
@Datasilla
@Fabio
@benutti
@BrutusSpain
@fshuk1
@Mgzs ev
@lukezrevz
@Gomev
Thank you very much in advance!

 

[jpvdheijn]

Could somebody explain what is happening here with the radio module? This cannot be coincidence that numerous persons are having to deal with this issue.

 

[smokie]

I'm taking it that the first two posts in the thread describe the problem

 

[jpvdheijn]

I'm taking it that the first two posts in the thread describe the problem

Well I don't think so, it is the symptom / possible solution. But what is the rootcause? Some sort of update?

 

[mgarman84]

HI, could someone send me the files too..Thank you

@trinenmark
@Joioannou
@espadoni
@LambertS
@Garfanki
@Bob Russ
@ASRtichy
@Datasilla
@Fabio
@benutti
@BrutusSpain
@fshuk1
@Mgzs ev
@lukezrevz
@Gomev

Hi. Sounds like this a known issue.. Could someone please send me the files too.

Many Thanks

 

[Mgzs ev]

I have now reset it 2x but now it freezes again .. could someone also send me the file? and would like some kind of manual please

U moet de usb formatteren naar fat32 of exfat. Vervolgens ga je naar de engineering mode en selecteer je de update dab.

Can you please send me the file?

 

[Joioannou]

Can you please send me the file?

Hope this work for you

 

[mgarman84]

Hope this work for you

Thank you...

Is it a case on dropping it on a stick and plugging in?

 

[Joioannou]

Thank you...

Is it a case on dropping it on a stick and plugging in?

You should format the usb to fat32 or exfat. Next you enter to engineering mode and you select the update dab .

 

[Mgzs ev]

Hope this work for you

 

[stoneyev]

Hi guys my long range mg5 went into dealers today as it was showing radio module initialising when they phoned me up they confirmed that it needed a replacementhol module they said they would order the part but could not give me an eta. Does anyone who’s had this done know the waiting time for the part.

Don't know if really valid, but my MG HS Phev has the central LCD unit taken out to be sent back to MG for repair!! However, having been away for a week got call today advising that due to backlog! unit will not be back until mid/late September. Contacted MG UK (eventually) and was told to approach dealer for a courtesy car. Picking up replacement on Monday. My reason was that whilst my MG still working, I have no control over heating/cooling, cruise control, limiter. Also, the emergency electronic braking systems now not working.

 

[Mgzs ev]

You should format the usb to fat32 or exfat. Next you enter to engineering mode and you select the update dab .

He don't start what do i wrong?

You should format the usb to fat32 or exfat. Next you enter to engineering mode and you select the update dab .

He don't start what do i wrong?

That is on de usb stick

Anyone having issues installing? it just keeps telling "start update dab".
Just with the single bin file on the stick...

How did you fix this? I have the same issue

Hallo, Benutti, ik denk dat ik je probleem heb, omdat ik de DAB-patch uit de auto had verwijderd. Dus als je de patch met mij deelt, zal ik proberen hem te installeren en dan zal ik je over mijn resultaten schrijven. Bedankt in advies

Anyone having issues installing? it just keeps telling "start update dab".
Just with the single bin file on the stick...

How did you fix it? I have the same issue he doesn't start the update

 

[Joioannou]

He don't start what do i wrong?

You press the update button and didn't start?

 

[Mgzs ev]

You press the update button and didn't start?

Yes ..after how long he starts normally?

 

[Joioannou]

How did you fix it? I have the same issue he doesn't start

Yes ..after how long he starts normally?

After a few seconds .

 

[Mgzs ev]

After a few seconds .

Nothing happens .
It looks like he doesn't read the usb stick..

I tried it whitout en the same thing happend..nothing only the bar with starting dab update

 

[Joioannou]

Nothing happens .
It looks like he doesn't read the usb stick..

I tried it whitout en the same thing happend..nothing only the bar with starting dab update

Format your usb again to exFAT. or try a different usb

 

[Mgzs ev]

Format you usb again to exFAT

Yes already tried..same it looks like he didnt read de usb...i put the usb in the left (Android auto ) usb port. Led is on ..but nothing happend. No error or info only the White bar ...

 

[Joioannou]

Yes already tried..same it looks like he didnt read de usb...i put the usb in the left (Android auto ) usb port. Led is on ..but nothing happend. No error or info only the White bar ...

Maybe you have a hardware issue not software . Did you contact you dealer ?

 

[Mgzs ev]

Yes already tried..same it looks like he didnt read de usb...i put the usb in the left (Android auto ) usb port. Led is on ..but nothing happend. No error or info only th

Maybe you have a hardware issue not software . Did you contact you dealer ?

Mayby beacause my radio is blocked 'radio module installation error' it didnt works?? I tried tomorrow first the 12 v batt negative loosse.. en than i tried the update again. Thank you for al your support