MG4 Software Update Thread

[paswotz]

Awesome resources, thanks!

Should I start with the TBOX update first to proceed with the FICM update, or is the order unimportant?

I think its not important.
I updated TBOX at the end.

In the meantime, I tried to obtain the VR files from MG to get the voice assistant running.

Response from MG support:

„We refer to your email and the issue described therein and inform you that image files for the voice control cannot be downloaded.“

 

[Yevgen K]

Several people found it hard to gather all scattered information in this thread to install 1300R63 (Trophy release) on a MG4 SE 2022/2023.
...

Would be nice to pin this post somehow so as to other people could find it.

 

[paswotz]

I don’t know if this helps, but in an MG4 Facebook group, someone commented that the control unit for the internet had to be replaced for the weather and other functions to work again.

 

[the happy bunny]

I don’t know if this helps, but in an MG4 Facebook group, someone commented that the control unit for the internet had to be replaced for the weather and other functions to work again.
View attachment 33533

I think this guy has had his TBox replaced

 

[bxuxas]

This is all you need FICM Update Guide – MG4 SE – MG Trip

It was straightforward to undertake this update. Thank you.
I did not understand the part about "it's important to update the software via SIPS."

 

[ntangle]

Weather and user interactions are back this morning, so hopefully people will be able to
Activate and also pair with iSmart

 

[thei]

excellent, I was finally able to activate my FCIM again, it only took a week.

 

[therealnowaczek]

I did not understand the part about "it's important to update the software via SIPS."

Me neither. I assume we shouldn't update the software via USB if we don't have the SIPS module to reprogram once the update is completed, right?

The instructions say:
1. "After the TBOX MPU (SOC) update has completed use SIPS to reprogramme and configure the TBOX ECU".
2. "Once the USB software has been applied and the Factory reset carried out, it is important to update the software Via SIPS. For the R63 update, the software for the FICM (config and Calibration) and the HVAC (config and calibration) software must show ticks in SIPS."

 

[wbuczolich]

Weather and user interactions are back this morning, so hopefully people will be able to
Activate and also pair with iSmart

I contacted austrian support/service yesterday, and even told them the server thats not working. They (someone with title 'technical lead') replied that everything was fine.
I then contacted the email that is given in the ismart smartphone app, but didn't get any response yet.

Got the up notification from my status website at 5:13 CET, so clearly someone repaired the thing...

 

[APMG]

Just in time my sips module arrived too. Happy new year

 

[therealnowaczek]

Just in time my sips module arrived too. Happy new year

Can you share your model so I can find a similar one nearby?

 

[APMG]

Can you share your model so I can find a similar one nearby?

VNCI VDI3 Roewe MG Wuling Maxus Automotive Diagnostic Tool

www.obdii.shop

Came in a few days

 

[Mouss]

Do you bought it in standard or express shipping mode?

 

[APMG]

Do you bought it in standard or express shipping mode?

When I put it through with a UK address it defaulted to like 5 days free.

 

[Mouss]

Thanks

 

[diabolikox]

Ottimo, finalmente sono riuscito ad attivare di nuovo il mio FCIM, ci è voluta solo una settimana.

How?

 

[APMG]

How?

Go into engineering menu activate and click activate avn.

I contacted MG today who confirmed there was an AWS issue.

Updated via SIPS the FICM and also Tbox using the usb and reprogramming on SIPS.

Battery slider is back on r63. Have another number of updates but currently doing them one by one incase of any issues.

Glad this forum exists as dealers are basically trying to charge you £250 just to update it

 

[siteguru]

FICM not FCIM

Forward (or Front) Interface Control Module

 

[samba]

Updated via SIPS the FICM and also Tbox using the usb and reprogramming on SIPS.

Battery slider is back on r63. Have another number of updates but currently doing them one by one incase of any issues.

Glad this forum exists as dealers are basically trying to charge you £250 just to update it

How did you Update with sips? Do you Need a Special Software of do i Need to Buy a Account to do the Update myself?

 

[the happy bunny]

How did you Update with sips? Do you Need a Special Software of do i Need to Buy a Account to do the Update myself?

Both and also a VDI dongle. Check this thread out…

Diagnostic VDI, VNCI, MDI with MG4

@haloweenhamster Hi mate, thanks for your detailed posts on the Firmware Updates. I started updating my Trophy last night, works like a charm. Was stressing though on the 7 part BMS Updates, i dont have a 12v charger and it took the battery down towards 11v, slow to update, was scared of...

www.mgevs.com