Diagnostic VDI, VNCI, MDI with MG4

[Mouss]

Yes your account is ok

 

[rod93]

hi, what is the difference between vdi2 and a vdi3? thks

 

[thei]

Can someone explain why the "Calibration File" in EPS shows always a "?" ?

I've already reflashed the "EPS" using "replace" and recalibrated it.

All modules are up to date.

German Trophy from the end of 2022

 

[BingBong]

Can someone explain why the "Calibration File" in EPS shows always a "?" ?

I've already reflashed the "EPS" using "replace" and recalibrated it.

All modules are up to date.

German Trophy from the end of 2022

The updates was smooth without problems with vnci?

 

[thei]

Yes, everything went smoothly.

The "?" has always been there in SIPS, as long as I've had the car and SIPS installed, even after the workshop / Car Dealer performed updates.
In the view where you can break down the modules individually, all modules are up to date.

 

[Mouss]

I think maybe this module doesn't need that part of update.

 

[jamakr4]

Very interesting thread. I have a problem with my AC not working (09/203 Luxury with heat pump). The thing is completely dead so no sounds /signs of it running at all. The battery heating over the app works. So I suspect it uses the PTC heater (because while it was heating up there were no sounds coming from the heat pump). The shop told me they have no clue what's wrong and that they read the DTC. So I guess they haven't found anything there. I personally think it's a software issue with the ecu and therefore have bought the VNCI adapter with 2 other guys.

1. What is the most recent software for the heat pump ecu?
2. What would you recommend doing if there is not DTC? I would at first do an IOC test where I try to force the heater to come on. If that doesn't work I would do a refresh of the ecu. Then update it and the last option would be the "replacement option" in SIPS.
3. If that doesn't work what else could the issue be (in terms of Software/what could fix it or should I try)?

Thanks in advance!

 

[EV Focus RO]

I want to buy this VNCI VDI3 VNCI VDI3 für Rongwei MG Wuling Baojun Datong Diagnoseschnittstelle unterstützt DoIP- und CANFD-Protokoll, passend für SAIC-Gruppensoftware - AliExpress 34

To I need to do the Network setup on the Windows laptop and VDI unit as described here ?


I want to use it with SIPS-19-11-24 as I read that newer SIPS might not work ?

 

[jamakr4]

I want to buy this VNCI VDI3 VNCI VDI3 für Rongwei MG Wuling Baojun Datong Diagnoseschnittstelle unterstützt DoIP- und CANFD-Protokoll, passend für SAIC-Gruppensoftware - AliExpress 34

To I need to do the Network setup on the Windows laptop and VDI unit as described here ?


I want to use it with SIPS-19-11-24 as I read that newer SIPS might not work ?

I installed the software yesterday (don't have my unit yet to test) but while installing, it ran some kind of script and I think I can also remember that there was a checkbox in the installer which does it while installing.

 

[EV Focus RO]

Indeed the installer set the Network, but how will SIPS download the software from MG the servers if the laptop no longer has internet acces with these settings ?

 

[mg4mc]

Use WiFi for your internet connection?

 

[EV Focus RO]

In fact I want to use a Windows VM
Guess I need to add a second network adapter to the VM for internet access

 

[double68]

if I read correctly "VNCI VDI3 for Rongwei MG" It does not have the network port, it only has the USB port